LED Pool Light Not Changing Colors? Here’s How to Fix It!

Is your LED pool light not changing colors as it should? Don’t worry, you don’t need to immediately call a professional to fix it. There are a few possible reasons for this issue, but the solutions are relatively simple and can be done by yourself. In this guide, we will walk you through the steps to resolve this problem.

A suggestion for you to get more necessary and deeper information, please click here waterproof led lights

Why Won’t The LED Pool Light Change Colors?
It can be quite frustrating when you have a beautiful LED pool light but it doesn’t change colors as it’s supposed to. There could be multiple reasons for this, including:

Bulbs: Some pool lights use tiny bulbs to change colors. When these bulbs burn out, the colors won’t change anymore.
Corrosion on components: The components that secure your LED lights inside the fixture might rust over time, causing them to fail.
Full LED board failure: Other problems such as water leakage can cause the LED board to fail.
Fix Guide for LED Pool Light Not Changing Colors
Now that you know the common causes of LED pool lights not changing colors, let’s move on to the solutions. However, please note that these solutions involve working with electricity, so if you’re not familiar with it or are afraid, it’s recommended to seek professional help. Also, please remember that these solutions are only applicable when the lights aren’t working, not if they’re completely unresponsive.

A suggestion for you to get more necessary and deeper information, please click here waterproof led

Solution #1: Change The Bulbs On A Multi-Bulb LED Board
If your pool lights have a LED board with multiple tiny bulbs, you can inspect and replace them if needed. Here’s what you need to do:

Shut off the circuit that powers the pool’s lights.
Turn on the pool lights to ensure the power is off.
Remove the screw that secures the pool light.
Pull the light away and take it to the pool’s edge, preferably on a dry surface.
Remove the cover and gasket to access the LED board.
Use a multimeter to test each light bulb for continuity.
Replace any burnt bulbs with new ones.
Test for continuity again.
Reinstall the light in the pool.
Tip: You can visit a local store to find a replacement bulb.

Solution #2: Check For Corrosion Inside The Fixture
Corrosion is a common problem with pool LED light fixtures over time. Here’s how to address it:

Follow the same steps as Solution #1 to remove the light from the pool and access the LED board.
Inspect the electrical components for rust or corrosion.
If you find any, detach the light fixture from the wiring.
Visit a nearby store and seek help from the seller to choose stainless replacement components.
Install the new stainless components.
Test the light bulb(s) to see if they work again.
Tip: Even if the fixture components are not damaged, it’s recommended to use stainless material for longevity.

Solution #3: Change the LED Board
If the LED board has completely failed, you’ll need to replace it. Here’s how:

Remove the light fixture from the pool and open it following the previous solutions’ steps.
Locate the LED board and disconnect the wire connected to a harness.
Remove all screws securing the LED board.
Detach the LED board and replace it with a new one.
Connect the new board’s wire and secure it with screws.
Ensure you discard the old LED board correctly.
Solution #4: Change The Single LED
If your LED light has a single light source that’s not working, you’ll need to replace it entirely. Here’s what you need to do:

Remove the light fixture from the pool and take it to a dry place.
Remove all securing items like screws and bolts.
Disconnect the wiring harness of the LED.
Unthread any screws securing it.
Replace the old LED with a new one that fits.
Secure the new LED in place and connect the wire harness.
Tip: If you have an LED board and want to switch to a single LED, you can follow the same steps for this solution.

Bonus: How To Change Colors In LED Pool Light
If you’re wondering how to change the color of your LED pool light, it depends on the model or the accessory you have. Some lights have built-in programming for different colors, while others require a separate control or switch. For example, Pentair sells a switch that can be installed near the pool, allowing you to choose multiple configurations. Always refer to the manual instructions of the product you purchase for specific guidance.

A suggestion for you to get more necessary and deeper information, please click here waterproof led lights for boats

AFQs
Why is my LED pool light not changing colors as it should?
There could be several reasons for your LED pool light not changing colors as expected. Common causes include issues with the controller, electrical wiring, or the light itself.

What are the possible reasons for the color-changing feature of my LED pool light not working?
Possible reasons include a malfunctioning controller, loose or damaged wiring, a faulty LED light unit, or issues with the remote control if applicable.

How can I troubleshoot issues with my LED pool light’s color-changing functionality?
To troubleshoot, start by checking the controller settings, inspecting the wiring for damage, and ensuring the LED light unit is functioning correctly. Test the remote control and consider resetting the system.

Are there specific steps or checks I can perform to diagnose the problem with my LED pool light?
You can diagnose the problem by:

Checking the controller settings and programming.
Examining the electrical connections and wiring for any loose or damaged components.
Testing the LED light unit and remote control (if applicable) for functionality.
Is there a common issue with the electrical wiring that could be causing my LED pool light’s color changes to malfunction?
Yes, electrical wiring issues such as loose connections, damaged wires, or corroded contacts can indeed disrupt the color-changing functionality of your LED pool light.

What role does the controller play in the color-changing feature of my LED pool light, and how can I ensure it’s functioning correctly?
The controller is responsible for sending signals to the LED pool light to change colors. To ensure it’s functioning correctly, check its settings, connections, and power source. Rebooting or resetting the controller may also help.

Can I reset or recalibrate my LED pool light’s color modes to resolve the issue?
Yes, you can often reset or recalibrate the color modes by following the manufacturer’s instructions provided in the user manual. This may help resolve issues with color-changing features.

What options do I have for remote control of my LED pool light’s color changes, and how can I troubleshoot remote-related issues?
Remote control options may include handheld remotes, mobile apps, or dedicated control panels. If you encounter issues with remote control, check the batteries, ensure line-of-sight to the receiver, and refer to the remote’s user manual for troubleshooting steps.

Are there routine maintenance tasks I should perform to prevent issues with my LED pool light’s color-changing feature?
Yes, regular maintenance includes cleaning the light unit, inspecting and tightening electrical connections, and ensuring the controller and remote control (if used) are in good working order. Keeping the pool area clean can also prevent debris from interfering with the lighting.

Are there recommended brands or products for reliable LED pool lights with color-changing capabilities to avoid future problems?
Brands known for reliable LED pool lights with color-changing capabilities include Pentair, Hayward, and Jandy. It’s advisable to choose reputable brands and read customer reviews to ensure product reliability and performance.

 
What We Learned
When your LED pool light won’t change colors, fixing it is not a complex task. There are various solutions available depending on the issue you encounter. Start by removing the fixture from the water and inspecting it. Replace any faulty bulbs or LED boards, and consider using stainless components for better durability. With these steps, you can bring vibrant colors back to your pool!